Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Bicycle Maintenance

Finish Line Premium Grease With Teflon (3.5-Ounce Tube)
$9.99
Finish Line's Premium Grease With Teflon is a race-proven lubricant formulated for the unique demands of bicycle bearings. It's exceptionally strong and thick, it doesn't separate and it repels water even when submerged. Rated "5 Chainrings, Exceptional Grease" by Bicycling Magazine, it's very slick and very tough and lasts as much as 5 times longer than petroleum grease.
Finish Line Citrus Aerosol Degreaser (12-ounce)
$10.99
Finish Line Citrus Degreaser. Super strong and fast. Cuts through the toughest of carbonized grit, grease, and grime. Low surface tension for thorough penetration into all areas. 100% active, biodegradable and nontoxic.
Finish Line Stanchion Fluoro Oil (15-Gram Bottle)
$10.99
Finish Line's Stanchion Fluoro Oil drastically reduces suspension fork "stiction" to improve your fork's freedom of movement. Stanchion Fluoro Oil is pure fluoropolymer oil — so slippery it even improves the surface slip of Teflon-coated surfaces! Plus, it conditions and protects seals and O-rings to help your fork work better longer. And, you can even use it on derailleur pivots and cables.
Finish Line E-Bike Lube
$11.99
E-Bike Chain Lube is designed to handle the unique requirements of electronic assist bicycles. E-Bike chains are exposed to higher torque and wattage loads. With this in mind, Finish Line engineered a light wet lube with unique extreme pressure additives to ensure that the lube stays within the premature wear and protecting against rust and corrosion. Finish Line’s E-Bike Chain Lube is an ideal complement to any dealer specializing in e-Bike sales and service.
Finish Line Super Bike Wash (1-Liter Bottle w/Sprayer)
$12.99
Finish Line's Super Bike Wash quickly cleans dirt, clay, road grime and chain gunk off your bike. Five different cleaning agents work together to create a high-speed cleaning system. Three different rust and oxidation inhibitors protect metal surfaces to prevent rusting. It's safe for all bike surfaces.
Finish Line Citrus Degreaser (20-Ounce Bottle)
$14.99
Reach for Finish Line's Citrus Degreaser when you've got tough grit and grime to cut through. Your parts clean up fast and then rinse residue-free with water. This degreaser is concentrated and water soluble so you can dilute it with up to 25 parts water for less difficult jobs. It's 100% biodegradable and completely non-toxic, too.
Fox Racing Shox Float Fluid Anti-Friction Lube
$19.99
Specially formulated low-friction lubricant for the seals and bushings of the air chamber for front and rear Fox Racing Shox. Float Fluid is the recommended lube for use with Fox forks and shocks. - Use when rebuilding Fox suspension to lubricate foam rings and seals - Corrosion inhibitor
Hutchinson Fast'air Inflator/Sealant
$15.99
- Inflates a tire and stops leaks in 90 seconds or less - Presta compatible - For use with tubed or tubeless tires - ORM-D: Pressurized liquid restricted from shipping by air
Kool-Stop Tire Bead Jack
$13.99
The Kool-Stop Tire Bead Jack is an articulated tool, with a comfortable grip, for installing really tight tires. The articulated end uses the rigid piece against the rim edge as a fulcrum while the hinged end lifts the bead up and over the opposite edge of the rim. This is a great tool for dealing with difficult tires.
Magura Royal Blood Brake Fluid
$9.99 - $22.99
- Specially formulated 10wt mineral-oil fluid for Magura hydraulic disc and rim brakes (Blue color)
OneUp Components EDC V2 Tool
$68.99
All your trailside tools, always on your bike and instantly accessible The EDC (Everyday Carry) tool contains all your essential trailside tools and can be conveniently stored inside your steerer tube/stem or the EDC Pump for quick and easy access. Add the optional Tubeless Plug Kit to your EDC tool to fix punctures fast. Whether you're going out for a quick lunch ride or setting off on a longer adventure, EDC has all the tools that you need to keep your bike running smoothly and fix any trailside mechanical. NEW FOR 2020 - Easier to remove from your bike, with a lower friction design. - Updated Chain Breaker is easier to use and has a steel body for increased durability - Stronger steel Spoke Keys - Black Multi-Tool - Tubeless plug jabber cover (Small storage capsule) - TOOL FEATURES (20 functions, 130g) - Includes a 10 function Multi-Tool, Tire Lever and Chain Breaker. MULTI TOOL FEATURES (10 functions, 58g) - 2, 2.5, 3, 4, 5, 6, 8mm, T25 Torx. Flat Head Screwdriver. EDC Top Cap Tool - The EDC Tool contains no loose, easy to lose driver bits - Ultra compact and super lightweight. TIRE LEVER/CHAIN BREAKER FEATURES - Tire Lever, Chain Breaker, 0,1,2,3 Spoke Keys, Presta Valve Core Tool, Spare Rotor Bolt CARRIER FEATURES - Spare Quick Link Storage - 12,16, 20g CO2 Cartridge Storage or 2 x Sealed Storage Capsules STORAGE CAPSULE - The V2 EDC tool now comes with a small and a large sealed storage capsule. The new small capsule is used to cover your jabber and preloaded bacon strip keeping it sticky for longer. The small capsule can be used with EDC Threaded options. It also allows you to use the EDC tool and tubeless plug kit inside the small 70cc OneUp pump. The large capsule only fits inside an EDC Threaded setup, EDC Stem or 100cc pump. The small capsule can be installed inside the large capsule for separating items. Storage Capsule Suggested Pack List (not included): Cash ($20 Note), Zip ties, Park TB-2 Emergency Tire Boot, Waterproof matches, Glueless patches. EDC TOOL STORAGE OPTIONS - The EDC Tool was designed to be stored inside your stem/steerer tube or inside the high volume, CNC Aluminum, EDC Pump with integrated CO2 inflator head. Grabbing your EDC tool from the pump is as easy as reaching for your water bottle. COMPATIBILITY - Backwards compatible with all V1 EDC Tool storage options.
Park Tool Replacement Chain Tool Pin
$2.99 - $3.95
Park Tool's Replacement Chain Tool Pin (2-Pack) fits Park Tool's CT-1, CT-2, CT-3, CT-3.2, CT-5, and CT-7 Chain Tools. • Made from hardened alloy tool steel • Uses 7mm or 9/32" 12 pt box end/socket • Sold singly or in pairs
Park Tool Chainring Nut Wrench
$4.99
Park's Chainring Nut Wrench makes chainring bolt installation and removal easy. It securely holds the slotted nut to prevent spinning when tightening or loosening the bolt. And, it's double-ended to fit most slotted-type nuts, including Campagnolo chainring bolt nuts.
Park Tool Gear Clean Brush
$4.99
Park's Gear Clean Brush has a handle on one end with a curved, serrated edge perfect for cleaning between cassette cogs. The other end's tough nylon bristles are ideal for cleaning the derailleurs, chain and other drivetrain parts to keep them clean and prevent premature wear. It also works great on brakes and other components that collect dirt and grime. The GearClean easily fits in a toolbox or pack.
Park Tool Tire Lever Set (Set of 2)
$4.99
• Updated with a new material and new design • Features a wide flat tip for easy entry and fast tire removal, ergonomic shape and a handy spoke hook when multiple levers are needed • Perfect for tight beads and tubeless tires • Sold in sets of two.
Park Tool Tire Lever Set (Set of 3)
$4.99
• Updated to be stronger, smoother, and more versatile • Features a new material and redesigned tip for easier entry into just about any tire, including tubeless • The unique design lifts the tire away from the rim and features a spoke hook to use when multiple levers are needed • This set includes 3 tire levers
Park Tool Double-Ended Cone Wrench
$5.99 - $6.99
Park's Double-Ended Cone Wrenches are designed for home mechanics. They're made of thin tool steel to fit the low-clearance adjusting nuts and cone flats on a variety of bearing assemblies. Each wrench is chrome plated for long life and available in popular combinations from 11 to 18mm. Most applications require a pair of cone wrenches. Call or stop by. We can recommend the correct sizes for your needs.
Park Tool GSC-3 Drivetrain Cleaning Brush
$5.99
This dual-sided brush is specifically designed for cleaning hard-to-reach areas of the bicycle drivetrain. The long, stiff bristles of the GSC-3 are narrow enough to reach between the gears of tightly-spaced modern cassettes, while the slim contoured end is capable of picking grit and grime out of tight spaces such as derailleur pulley wheels.
Park Tool Hex Wrench (8mm)
$5.99
Park's Hex Wrenches are every mechanic's best friend. They are constructed from industrial quality steel for durability and feature chamfered tips for a precision fit. And, their convenient L shape is perfect for jobs that require lots of leverage or for getting to hard-to-reach bolts.
Park Tool Open Ended Metric Wrench (9, 11mm)
$5.99
Park's Open Ended Metric Wrench is a thin wrench with 9 and 11mm openings so it's perfect for working on the pivot-bolt nuts on sidepull brakes (and derailleurs with hex nuts). This useful tool is nickel plated for durability.
Park Tool Open Ended Metric Wrench (8, 10mm)
$6.99
Park's Open Ended Metric Wrench is a special thin wrench with 8 and 10mm openings perfect for adjusting the thin pivot-bolt nuts on sidepull brakes (and other hex nuts on your bicycle). This handy brake tool is made of durable tool steel that's nickel plated for corrosion resistance.
Park Tool Cassette Lockring Tool
$7.99
Heat-treated alloy tool steel, one inch base fits wrench or bench vise. Thin-wall construction allows use without removal of cones and locknuts. The FR-5 has 12 splines that are approximately 23.4mm across. - Fits Shimano, SRAM, Sunrace, Suntour, Chris King and other cassette lockrings - Fits the SRAM XX1 11-speed cassettes - Also fits Shimano disc brake lockrings - Always use a quick-release skewer to hold the tool in place and snug to cogs when loosening; for solid axles, use the axle nut
Park Tool GSC-4 Bicycle Cassette Cleaning Brush
$7.99
A sturdy bicycle cleaning brush with a unique angled and contoured shape – perfect for cleaning cassettes and freewheels as well as tires. With a strong ergonomic handle and stiff nylon bristles, the GSC-4 scrubs away the toughest muck and mess.
Park Tool P-Handled Torx Wrenches
$7.99 - $9.99
They always say, the right tool for the right job. Park's P-handled Torx Wrenches are available in T6, T8, T10, T15, T20, T25, T30 and T40 sizes. They feature offset handles made from durable nylon with a comfortable, ergonomic design. The wrenches are made of high-torque industrial steel for excellent durability.
Park Tool PolyLube 1000 4-Ounce
$7.99
Park's PolyLube is specifically formulated to protect bearing components. Its Polyurea grease has extremely high shear strength to protect bottom brackets, headsets, pedals and hubs. Use it on threads, seatposts, stems and cables, too. It's also safe for fork seals, and repels water.
Park Tool Spoke Wrench
$7.99
Park's professional-quality, precision-sized spoke wrenches are hardened and chrome plated for long service. Wrenches are vinyl coated in one of four colors indicating the size at a glance. You will find these wrenches in virtually every professional bike shop and every shop mechanic's personal tool stash. Make sure you have the sizes you need in your home toolbox and bike bag.
Park Tool Tape Measure
$7.99
Precision measurement awaits with Park's Tape Measure. This small and handy tool boasts a tough, composite housing, as well as both Metric and English readings of up to 3.65 meters/12 feet.
Park Tool Hex Tool
$8.95 - $13.95
Specially designed for crank bolts, freehub removals and pedal installs and removals, Park's Hex Tools are built for speed, leverage and comfort. Their super-precise hex heads and dual-density, ergonomic handle mean the HTs may soon become your new favorite tools.
Park Tool Bottom Bracket/Cassette Tool (Campagnolo)
$8.99
Park's Bottom Bracket/Cassette Tool for Campagnolo is an indispensable tool for your Campagnolo drivetrain. It's for installing and removing all Record, Chorus, Centaur and Athena bottom brackets, and all Campagnolo cassette lockrings.
Park Tool Shop Cone Wrench
$8.99
Park's Cone Wrenches are made of durable tool steel and are nice and thin to fit on the small-clearance cones found on hubs and other bearing assemblies. Plus, they work as regular wrenches, too. They feature Park's special Y heads that put more material where it's needed for excellent durability and strength. Most applications require at least 2 cone wrenches. If you have questions please contact us and we can recommend the correct sizes for your needs.