Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Other

Zipp Bearing Kit: For 2009-Current 88/188 Hubs
$40.99
Zipp Speed Weaponry Cartridge Bearings - Will not work on Zipp 188 V9 rear hubs
Wolf Tooth Components GoatLink
$29.99
Goatlinks are designed to optimize the derailleur's position relative to your cassette. Offered in two versions - a 10-speed and 11-speed, each is intended to improve the shifting of your 1x drivetrain. - Optimized for using a Shimano XT 8000 or XTR 9000 Rear Derailleur with a 10-42, 10-44, 11-45, 11-46 rear cassette setup - Compatible with M8000 (XT) and M9000 (XTR) series eleven-speed Shimano rear derailleurs - Double chainrings are not currently supported - Triple chainrings are not supported - Direct Mount-native frames and SRAM derailleurs are not supported
Wolf Tooth Components ReMote Light Action Dropper Lever
$69.95 - $69.99
Wolf Tooth ReMote Light Action has a longer lever arm than the standard ReMote and is optimal for dropper posts with a harder pull or for riders that just prefer a really light actuation feel. It reduces the force to actuate a dropper by nearly a third of the standard ReMote. Based on rider feedback and tailored to work with some posts’ stiffer internal springs, the ReMote Light Action is also the choice of those with thumb injuries or reduced hand strength. - Upfront cable fixing - Large diameter ball bearing - Cable-kind clamp - Low-profile, light action - Integrated cable adjust - Breakaway axle pivot - High-traction lever - Broad compatibility
Wolf Tooth Components Remote Pivot Axle
$8.99
Wolf Tooth Remote Pivot Axle
Wolf Tooth Components Roadlink
$21.99
The RoadLink is a simple device that offsets the position of your Shimano road derailleur to make it possible to run a wide-range mountain bike style cassette. It is an ideal solution for riders looking to convert their road, gravel, cyclocross, or commuter. - The RoadLink is optimized for use with ten or eleven-speed 11-36t and 11-40t cassettes - 11-42 or 10-42 setups are not supported - Works with all 10-11 speed Shimano and SRAM Road Derailleurs - Best used with Single or Double Setups - see manufacturer's site for more details
Wolf Tooth Components Roadlink Direct Mount
$29.99
The RoadLink DM (Direct Mount) is the RoadLink designed to fit Shimano’s current generation R8000 Ultegra and R9100 Dura-Ace rear derailleurs. It serves as a simple device to offset the position of the rear derailleur, making it possible to run a wide-range mountain bike style cassette. It’s an ideal solution for riders looking to convert their road, gravel, cyclocross, or commuter. - Fits Shimano R9100-generation Dura-Ace and R8000-generation Ultegra rear derailleurs - CNC machined from 6061-T6 aluminum with stainless steel bolt - Does not change the derailleurs total chain wrap capacity - Fits standard derailleur hangers only - Best used with Single or Double Setups - see manufacturer's site for more details
Wheels Manufacturing Inc. 4.0mm Inner Chainring Spacer, Bag of 20
$22.95
4.0mm chainring spacer for the inner chainring position. Machined to close tolerances out of 6061 aluminum. Excellent for improving chain line, or for replacing missing spacers. - Inner Diameter: 8mm - Thickness: 4.0mm - 20 per bag
Wheels Manufacturing Inc. Aluminum Headset Spacer
$3.00 - $24.95
You have to get that handlebar height just right. It's more comfortable, more efficient, and helps keep your entire upper body healthier. Wheels Manufacturing has your well-being covered with a wide variety of sizes to ensure your bars are right where they need to be. - Spacers are sold individually or in packs of 5 or 10 spacers. Select options from the dropdown menus to display pack size
Wheels Manufacturing Inc. Angled Spacer Single Speed Conversion Kit
$47.20
Wheels Manufacturing Angled Spacer Single Speed Conversion Kit is a Shimano- and SRAM-compatible single speed conversion kit with ramped spacers. Additional spacers are included to dial-in chainline. Includes: - (2) - 9mm angled spacers - (6) - 3mm spacers - (2) - 1mm shims - (1) - lockring - (1) - 16t cog Compatible with: - Any 1/2 x 1/8 pitch chain, this includes BMX and Track chains - Any 8 or 9-speed chain * Does not work acceptably with 10 or 11-speed chains
Wheels Manufacturing Inc. Ball Bearing Retainer
$6.75 - $17.50
Grade 300 retainer bearings for headset and bottom bracket service. - 10 Retainers/Bag
Wheels Manufacturing Inc. Carbon Fiber Headset Spacer 1-1/8
$2,222.22
- Black carbon fiber weave headset spacers for tuning ride height - No logos - Includes five (5) 1-1/8" x 2.5mm spacers
Wheels Manufacturing Inc. Carbon Fiber Headset Spacer 1-1/8-inch x 10mm
$5.00
- Black carbon fiber weave headset spacers for tuning ride height - No logos - Includes one (1) 1-1/8" x 10mm spacer
Wheels Manufacturing Inc. Carbon Fiber Headset Spacer 1-1/8-inch x 20mm
$7.99
- Black carbon fiber weave headset spacers for tuning ride height - No logos - Kit includes one (1) 1-1/8" x 20mm spacer
Wheels Manufacturing Inc. Carbon Fiber Headset Spacers 1-1/8-inch x 5mm Bag of 5
$10.00
- Black carbon fiber weave headset spacers for tuning ride height - No logos - Includes five (5) 1-1/8" x 5mm spacers
Wheels Manufacturing Inc. Chainstay Protector - 10-Pack
$59.00
Wheels Manufacturing Clear Chainstay Protectors keeps your frame's paint looking good and helps quiet any chain slap on the chainstay. Pack of 10
Wheels Manufacturing Inc. Derailleur Hanger 108
$40.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Inc. Derailleur Hanger 11
$27.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Inc. Derailleur Hanger 12
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x10 Socket Head Cap Screws
Wheels Manufacturing Inc. Derailleur Hanger 120
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws Note: The mounting holes on Wheels Mfg DROPOUT-120 are 18mm apart, center-to-center. Do not confuse this hanger with DROPOUT-138.
Wheels Manufacturing Inc. Derailleur Hanger 14
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x10 Socket Head Cap Screws
Wheels Manufacturing Inc. Derailleur Hanger 146
$29.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (3) M3x8 Flat Head Screws - Specialized Part #9890-4226 Note: This hanger has been updated to match Specialized Part #9890-4226 and will accommodate 28-tooth and larger cassette cogs. Shifting with smaller cassette cog ranges will not be adversely affected.
Wheels Manufacturing Inc. Derailleur Hanger 148
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws
Wheels Manufacturing Inc. Derailleur Hanger 16
$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x10 Socket Head Cap Screws Note: Wheels Mfg DROPOUT-16 has 14.33 mm between the two holes (center-to-center) and 6.51mm between the two vertical plates.
Wheels Manufacturing Inc. Derailleur Hanger 164
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x8 Flat Head Screws
Wheels Manufacturing Inc. Derailleur Hanger 168
$27.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M5x10 Socket Head Screw
Wheels Manufacturing Inc. Derailleur Hanger 186
$48.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws Note: Included hanger hardware is 1mm too long, it is suggested that existing hanger hardware be used!
Wheels Manufacturing Inc. Derailleur Hanger 19
$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Inc. Derailleur Hanger 21
$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Inc. Derailleur Hanger 269
$32.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - (2) M3x8 Flat head screws included - Cannondale Hanger #KP284
Wheels Manufacturing Inc. Derailleur Hanger 276
$65.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Norco part #959375-16-1 - (1) M8 Bolt for DROPOUT-276 included Notes: - For use with direct mount Shimano Saint rear derailleur. - If using direct mount Shimano XTR, XT or SLX rear derailleur, use Wheels Mfg DROPOUT-275. - If using any non-direct mount rear derailleur use Wheels Mfg DROPOUT-202.
Wheels Manufacturing Inc. Derailleur Hanger 305
$40.00
All Wheels Manufacturing replacement derailleur hangers are produced in our Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - (1) M5x10 Socket Head Screw Included - For 12x1.5 MAXLE - Replaces Pivot Part #018 (FP-RDH-TA-12MM-BLK-V3)
Wheels Manufacturing Inc. Derailleur Hanger 306
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in our Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M5x10 Socket Head Screw - For Thru Axle - Replaces Haibike Part #2501170090
Wheels Manufacturing Inc. Derailleur Hanger 31
$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Inc. Derailleur Hanger 319
$32.99
All Wheels Mfg. replacement derailleur hangers are produced in Colorado to exacting tolerances. - Replaces CO-OP Part #162-REI015-01 - Attaches to frame with (1) M3x8mm flat head screw (sold separately) - CNC machined 6061 aluminum - Black anodized finish
Wheels Manufacturing Inc. Derailleur Hanger 323
$48.00
All Wheels Mfg. replacement derailleur hangers are produced in Colorado to exacting tolerances. - Replaces Specialized Part #S172600001 - Includes both sides of the derailleur hanger - Attaches to frame with (1) M3x6 socket head screw (sold separately) - CNC machined 6061 aluminum - Black anodized finish
Wheels Manufacturing Inc. Derailleur Hanger 53
$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws
Wheels Manufacturing Inc. Derailleur Hanger 54
$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Inc. Derailleur Hanger 58
$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws
Wheels Manufacturing Inc. Derailleur Hanger 65
$22.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt (Long - Bolt Only)
Wheels Manufacturing Inc. Derailleur Hanger 77
$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Inc. Dropout Savers
$26.95
Wheels Manufacturing Dropout Savers are designed to replace damaged threads in rear derailleur mounts. Made from aircraft quality steel, dropout savers provide an economical and reliable alternative to the "major surgery" of replacing a complete dropout. - Wide Dropout Saver (DS-1) fits dropouts thicker than 7mm - Narrow Dropout Saver (DS-2) fits dropouts 7mm or less in thickness - 2 pieces per bag
Wheels Manufacturing Inc. Emergency Derailleur Hanger
$32.00
The Emergency Derailleur Hanger is a great thing to bring along on rides because it lets you temporarily replace a hanger that is damaged or broken on a ride. The Emergency Hanger works with most frames and derailleurs and allows the use of most gears, and more importantly, for the bike to be ridden instead of pushed or carried. So, it ensures that you can get home safe.Mounts to virtually any dropoutWill keep your bike shifting and get you homeCNC-machined aluminum for increased durabilityBlack anodized finish
Wheels Manufacturing Inc. Grade 25 Loose Ball Bearings
$10.75 - $14.95
Loose ball bearings to fit many brands of hubs, headsets, and bottom brackets. Grade 25 bearings are Dura-Ace or Campagnolo Record quality.
Wheels Manufacturing Inc. Grade 300 Loose Ball Bearings
$16.00 - $17.95
Loose ball bearings to fit many brands of hubs, headsets, and bottom brackets. Grade 300 — Ultegra level quality.
Wheels Manufacturing Inc. Loose Ball Bearings
$0.09
- High roundness grade 300 balls in a shop dispenser bottle - 1/8-inch, 500/bottle - 7/32-inch, 500/bottle
Vision Armrest Pads
$22.99
- Deluxe molded replacement pads fit all armrest Vision aero bars - Molded replacement pads fit the Vision Mini TT clip-ons - Dual density foam for maximum comfort - Non-slip textured top
Thomson Seatpost Bolt Kit
$3.99
Bolts, clamps and washers for Thomson Seatposts and Seat Clamps. - Sold individually, includes bolt, washer and nut
Thomson Seatpost Collar
$29.99 - $39.95
Precision CNC machined of light and durable 7000-series aluminum with a fine anodized finish, and 100% made in the USA, Thomson's Seatpost Collar is a beautiful upgrade for your bicycle. It features their bolt, washer and barrel nut combination that allows float on both sides of the collar slot for consistent clamping force. Plus the bolt-hole angle, the collar's 12.7mm inside height and the offset slot, ensure optimum seatpost clamping force at only 25 inch pounds of torque to protect your precious frame and seatpost.
Thomson X4 Dress Up Kit
$35.99 - $39.95
Like putting on a fine suit, adding Thomson's X4 Dress Up Kit to your Thomson X4 stem (sold separately) helps you look your best for any riding occasion and stand out from the crowd. This cool kit includes an anodized faceplate and top cap, 6 silver bolts and 6 black bolts so you can customize the look of your front end and add some class to your ride.
Third Eye Chainwatcher
$9.99
- Prevents chain derailment when shifting to inner ring - Adjustable hose-type clamp fits 1-1/8" to 1-3/8" seat tubes
Surly 10/12 Adapter Washer for Solid Axle
$15.00
Surly wants you to be able to set up you ride just the way you want it. This pair of adapter washers make it so you can throw your favorite 135, 170, or 190mm O.L.D. 10mm solid axle hub into the rear end of a 142, 177, or 197mm spaced thru-axle frame. Add the adapters, add the wheel, install and tighten the nuts and, bam, you're ready to rip. Make sure the solid axle on your wheel is the right length for the frame spacing. For instance: 190mm OLD QR goes with 197mm thru-axle spacing.
Surly Singlespeed Spacer Kit
$45.99
Pair this kit with a cassette cog of your choosing (sold separately) and discover the joy and simplicity of a singlespeed without the cost of a new wheel. The Singlespeed Spacer Kit includes a variety of high quality aluminum spacers so you can dial your chainline and a stainless steel lockring to tighten everything down right.
Surly Tuggnut Chain Tensioner
$30.99
If you've got rear-facing horizontal dropouts and you don't want your chain to slip when your rear wheel pulls forward, then Surly's got you covered. The Tuggnut is made from investment-cast stainless steel and it'll hold your wheel in place. Plus, it comes with an adapter for quick release axles and features an integrated bottle opener.
Sunlite Cantilever Boss
$4.99
- Standard replacement cantilever/v-brake bosses
Specialized CNC Alloy Bar End Plugs
$19.99 $29.99 33% Off
These lightweight alloy bar end plugs provide a clean look and allow the use of bar ends on your Specialized carbon bar. - 100% CNC machined, 4-piece alloy design. - Dual side-loaded cylinder design ensures even pressure across full width of plug and bar end clamp. - Aluminum "lip" protects carbon bars from impacts. - Beautiful and clean machined design enhances handlebar looks. - Expansion range: 18.5mm to 20.0mm - Weight: 22g/pair - NOTE: Specialized bar end plugs are required for Specialized carbon bars.
Specialized Carbon Steerer Tube Plug
$9.99
Keep the weight down and your headset snug with the Specialzied Carbon Steerer Tube Plug.
Specialized Command Post SRL
$59.99
The SRL lever gives riders with 1x drivetrains the option to control their Command Post with lever option that mounts beneath the bar in place of a front shifter. - Command Post lever for the modern 1x drivetrain systems. - Adjustable lever position allows for the perfect set up. - Sealed cartridge bearing pivot for smooth action. - Ideal pull ratio for easy lever activation. - Requires additional mounting hardware (SRAM MatchMaker or equivalent is recommended).
Specialized Pave Clamp 7+9mm
$34.99
Re-engineered clamp with an optimized center-loaded bolt design equalizes load distribution to ease position adjustments. With this clamp set you will be able to clamp metal 7x7mm saddle rails and Specialized FACT carbon 7x9mm saddle rails. - 7x7mm and 7x9mm replacement clamp set for all Specialized road seatposts equipped with a single-bolt cylindrical wedge clamp design - New design clamp for better clamping and non-slipping of the saddle
Shimano 10-Speed Chain Pins
$9.00
- Replacement chain pins for Shimano 11-speed chains - Compatible with CN7900/7801 chains - 3 pins per pack
Shimano 11-Speed Chain Pins
$11.00
- Width: 5.8 mm - Drivetrain Speeds: 11 - Color: Silver - Reusable: No
Page 1 of 3 Next page