Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Other

Problem Solvers MisMatch Adapter 1.0/1.1
$24.99 - $44.99
MisMatch adapters allow users to mount Shimano & SRAM brakes and shifters on one clamp. MisMatch Adapter 1.0/1.1 attaches SRAM shifters to Shimano I-Spec-A or I-Spec-B brake lever clamps. MisMatch adapters and the ever evolving “standards” it attempts to integrate between SRAM and Shimano is a confusing subject. Shimano brake and shifter mounting options have changed a lot, going through four mounting systems from 2011-2016. Shimano components have a model number printed somewhere on the brake and/or shifter, and this is the best way to determine what you own and what adapter you need. MisMatch 1.0/1.1 fits Shimano brake levers:BL-M985, BL-M988, BL-M820, BL-M785, BL-T785, BL-M675, BL-T675, BL-M640, BL-M596, BL-M820-B, BL-M785-B, BL-M675-B, BL-M640-B, BL-M615, BL-M506 - Annodized Black
Problem Solvers MisMatch Adapters
$11.99 - $44.99 $29.99 - $44.99 Up to 60% Off
Problem Solvers' MisMatch Adapters allow you to combine your Shimano and SRAM shifters and brakes onto a single clamp for a more ergonomic, less-cluttered handlebar. These CNC-machined aluminum adapters work with Shimano I-Spec and SRAM MatchMaker components to fasten your preferred combination on to a single, existing bar clamp.
SRAM Guide Ultimate Hose Kit
$44.99
Original equipment hydraulic hoses for no-compromise brake performance. - Fits All B (2016+) Versions of Guide RSC RS R - Hose length: 2000mm
Problem Solvers Clamp-on Downtube Shifter Mount
$43.99
• Allows the use of downtube shifters on bikes without downtube shifter braze-ons • Compatible with 9/10-speed Shimano shifters • 31.8mm clamp with shims for 28.6mm tubes • Shifters not included
Dimension Steerer Extender
$41.99
Dimension Steerer Extender adds 2 to 3-1/4" height to steerer. - Extender clamps to steerer; stem clamps to extender - Adds 2 to 3-1/4-inch height to threadless steerer - Includes top cap and long bolt - 40mm of threadless steerer is required for proper installation - Do not stack steerer extenders; no more than one steerer extender recommended per bike - WARNING: Dimension Steerer Extender is not recommended for use on forks with carbon fiber steerers
Zipp Bearing Kit: For 2009-Current 88/188 Hubs
$40.99
Zipp Speed Weaponry Cartridge Bearings - Will not work on Zipp 188 V9 rear hubs
Wheels Manufacturing Inc. Derailleur Hanger 108
$40.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Inc. Derailleur Hanger 305
$40.00
All Wheels Manufacturing replacement derailleur hangers are produced in our Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - (1) M5x10 Socket Head Screw Included - For 12x1.5 MAXLE - Replaces Pivot Part #018 (FP-RDH-TA-12MM-BLK-V3)
Problem Solvers Direct Mount Adapter
$39.99
The Problem Solvers Direct Mount Adapter gives you a place to install direct-mount Shimano and SRAM derailleurs. It was initially developed for standard mountain bike frames with 68/73mm wide bottom bracket shells, and is equally suited to fat/snow bikes, where their 100mm wide bottom brackets make front derailleur applications a little difficult. The adapter is made of light and durable 6061 aluminum.
Problem Solvers MisMatch Adapter 1.2 Pair
$39.99
MisMatch adaptors allow users to mount Shimano & SRAM brakes and shifters on one clamp. Available in multiple configurations. -Annodized Black -Attaches SRAM shifters to Shimano I-Spec II brake lever clamps MisMatch 1.2 adaptor fits Shimano brakes: BL-M9020, BL-M9000, BL-M8000, BL-M7000
Profile Design Aerobar Bracket Riser Kit
$39.99
Profile Design's Aerobar Bracket Riser Kit lets you customize the height of your Profile aero bar brackets and extensions for finding a perfect riding position. The kit includes two 10mm risers, two 5mm risers and appropriate-length bolts. Multiple kits can be used if you need more height. Note that this kit is not recommended for Profile Design's Carbon Stryke or T-mag bars.
Thomson Seatpost Collar
$29.99 - $39.95
Precision CNC machined of light and durable 7000-series aluminum with a fine anodized finish, and 100% made in the USA, Thomson's Seatpost Collar is a beautiful upgrade for your bicycle. It features their bolt, washer and barrel nut combination that allows float on both sides of the collar slot for consistent clamping force. Plus the bolt-hole angle, the collar's 12.7mm inside height and the offset slot, ensure optimum seatpost clamping force at only 25 inch pounds of torque to protect your precious frame and seatpost.
Thomson X4 Dress Up Kit
$35.99 - $39.95
Like putting on a fine suit, adding Thomson's X4 Dress Up Kit to your Thomson X4 stem (sold separately) helps you look your best for any riding occasion and stand out from the crowd. This cool kit includes an anodized faceplate and top cap, 6 silver bolts and 6 black bolts so you can customize the look of your front end and add some class to your ride.
Salsa Flip-Lock Seat Clamp
$36.99 - $37.00
Need a hand-friendly quick-release with some major bling? Then Salsa's Flip-Lock Seat Clamps are just what you're waiting for! Regarded as some of the best out there by those in the know, these sweet seat collars are super tough, easy to use and come in a variety of colors to please your palette. - Machined 6061-AL with stainless steel pivot and bolt - Anodized with laser-etched logo - Integrated Flip-Off lever - 30.0 clamp for most Salsa steel frames - 30.6 clamp for most Salsa Scandium frames - For smooth operation, lightly grease the bolt threads and keep all parts clean
Salsa Flip-Lock
$34.99 - $36.99
Need a hand-friendly quick-release with some major bling? Then Salsa's Flip-Locks are just what you're waiting for! Regarded as some of the best out there by those in the know, these sweet seat collars are super tough, easy to use and come in a variety of colors to please your palette.
SRAM GX Eagle Rear Derailleur Pulley Kit
$34.99
GX Eagle Rear Derailleur Pulley Kit
Salsa Post-Lock Rack Mount
$32.00 - $32.99
Our Post-Lock is a bicycle rack attachment point that can be positioned anywhere on your seatpost to provide a mounting point. Post-Locks do not have a lip like our Lip-Lock, Flip-Lock, and Rack-Lock so therefore cannot be used as a seatpost clamp. - NOTE: This IS NOT a seat collar and CANNOT BE USED to keep your seatpost in place - NOTE: NOT FOR USE with carbon fiber seatposts - NOTE: Please consult your seatpost manufacturer to check compatibility - Max torque 3–5Nm - AL-6061 Aluminum - Strong rack attachment points - 34mm-wide rack mount threaded for M5 bolts - Available for 27.2, 30.9, and 31.6 mm diameter seatposts
Wheels Manufacturing Inc. Derailleur Hanger 269
$32.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - (2) M3x8 Flat head screws included - Cannondale Hanger #KP284
Wheels Manufacturing Inc. Derailleur Hanger 319
$32.99
All Wheels Mfg. replacement derailleur hangers are produced in Colorado to exacting tolerances. - Replaces CO-OP Part #162-REI015-01 - Attaches to frame with (1) M3x8mm flat head screw (sold separately) - CNC machined 6061 aluminum - Black anodized finish
Wheels Manufacturing Inc. Derailleur Hanger 12
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x10 Socket Head Cap Screws
Wheels Manufacturing Inc. Derailleur Hanger 120
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws Note: The mounting holes on Wheels Mfg DROPOUT-120 are 18mm apart, center-to-center. Do not confuse this hanger with DROPOUT-138.
Wheels Manufacturing Inc. Derailleur Hanger 14
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x10 Socket Head Cap Screws
Wheels Manufacturing Inc. Derailleur Hanger 148
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws
Wheels Manufacturing Inc. Derailleur Hanger 164
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x8 Flat Head Screws
Wheels Manufacturing Inc. Derailleur Hanger 306
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in our Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M5x10 Socket Head Screw - For Thru Axle - Replaces Haibike Part #2501170090
Wheels Manufacturing Inc. Derailleur Hanger 38
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Inc. Emergency Derailleur Hanger
$32.00
The Emergency Derailleur Hanger is a great thing to bring along on rides because it lets you temporarily replace a hanger that is damaged or broken on a ride. The Emergency Hanger works with most frames and derailleurs and allows the use of most gears, and more importantly, for the bike to be ridden instead of pushed or carried. So, it ensures that you can get home safe.Mounts to virtually any dropoutWill keep your bike shifting and get you homeCNC-machined aluminum for increased durabilityBlack anodized finish
SRAM Braze-on Front Derailleur Clamp with ChainSpotter Stop
$31.99
Clamp allows use of a braze-on derailleur on frames without the braze-on tab. Includes a tab to use SRAM's lightweight and easy-to-adjust chain control device. - Fits all SRAM road braze-on front derailleurs - ChainSpotter not included
Surly Tuggnut Chain Tensioner
$30.99
If you've got rear-facing horizontal dropouts and you don't want your chain to slip when your rear wheel pulls forward, then Surly's got you covered. The Tuggnut is made from investment-cast stainless steel and it'll hold your wheel in place. Plus, it comes with an adapter for quick release axles and features an integrated bottle opener.
ENVE Seatpost Replacement Hardware
$29.99
What It Is Replacement hardware for ENVE carbon fiber seatposts. Who It's For Folks who need additional hardware for their ENVE seatposts. Why We Made It We get calls all the time for replacement hardware, so we made a little kit to make it easy for everyone.
K-Edge Pro Road Braze-on Chain Catcher
$29.99
The Pro Braze-On Chain Catcher from K-EDGE is used by most professional cyclists and pro teams around the world, in all types of racing including prestigious Olympic Games, World Championships, and Grand Tours, such as the Tour de France, Paris-Roubaix, and Giro d ’Italia. The Pro model is designed to improve on the original K-EDGE Chain Catcher design: - Easier Installation – Independent setup and installation of front derailleur and the K-EDGE Chain Catcher - Stronger – Separate and lower attachment /adjustment bolt equates to stronger hold ensuring the chain cannot drop below the chain catcher - Optimized Design – Unique curved ramp profile enables quicker chain engagement with the chain ring while eliminating dropped chains - Material: 6061-T6 CNC machined Aluminum - Fitment: All braze-on mounted front derailleurs* - Hardware: Includes all mounting hardware for Shimano, SRAM, and Campagnolo front derailleurs * Not compatible with Campy EPS * May not work with all third-party braze-on adapter clamp. Shimano - Made in Boise, Idaho, USA, - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.
Wheels Manufacturing Inc. Derailleur Hanger 146
$29.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (3) M3x8 Flat Head Screws - Specialized Part #9890-4226 Note: This hanger has been updated to match Specialized Part #9890-4226 and will accommodate 28-tooth and larger cassette cogs. Shifting with smaller cassette cog ranges will not be adversely affected.
Wolf Tooth Components Roadlink Direct Mount
$29.99
The RoadLink DM (Direct Mount) is the RoadLink designed to fit Shimano’s current generation R8000 Ultegra and R9100 Dura-Ace rear derailleurs. It serves as a simple device to offset the position of the rear derailleur, making it possible to run a wide-range mountain bike style cassette. It’s an ideal solution for riders looking to convert their road, gravel, cyclocross, or commuter. - Fits Shimano R9100-generation Dura-Ace and R8000-generation Ultegra rear derailleurs - CNC machined from 6061-T6 aluminum with stainless steel bolt - Does not change the derailleurs total chain wrap capacity - Fits standard derailleur hangers only - Best used with Single or Double Setups - see manufacturer's site for more details
Wheels Manufacturing Inc. Derailleur Hanger 11
$27.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Inc. Derailleur Hanger 168
$27.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M5x10 Socket Head Screw
Wheels Manufacturing Inc. Derailleur Hanger 16
$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x10 Socket Head Cap Screws Note: Wheels Mfg DROPOUT-16 has 14.33 mm between the two holes (center-to-center) and 6.51mm between the two vertical plates.
Wheels Manufacturing Inc. Derailleur Hanger 19
$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Inc. Derailleur Hanger 21
$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Inc. Derailleur Hanger 31
$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Inc. Derailleur Hanger 53
$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws
Wheels Manufacturing Inc. Derailleur Hanger 54
$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Inc. Derailleur Hanger 58
$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws
Wheels Manufacturing Inc. Derailleur Hanger 77
$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Dimension Quill-To-Threadless Steerer Adapter
$26.99 $29.99 10% Off
Dimension Stem Column Adaptors - Total quill length 180mm - Measurement from minimum insertion to top of steerer adaptor is 118mm - Alloy - Quill insertion diameter: 1-inch
Shimano Di2 E-Tube Wire
$26.99
This is the correct plug-and-play wire for Shimano's E-Tube Di2 electric-shifting systems. It comes in sixteen different lengths, so choose the one(s) that's right for your Di2 E-Tube wiring configuration.
Wheels Manufacturing Inc. Dropout Savers
$26.95
Wheels Manufacturing Dropout Savers are designed to replace damaged threads in rear derailleur mounts. Made from aircraft quality steel, dropout savers provide an economical and reliable alternative to the "major surgery" of replacing a complete dropout. - Wide Dropout Saver (DS-1) fits dropouts thicker than 7mm - Narrow Dropout Saver (DS-2) fits dropouts 7mm or less in thickness - 2 pieces per bag
Avid Post-Mount Disc Brake Adaptor
$25.99
- Includes stainless steel bolts - 40mm fits 200mm Front and 180mm Rear Rotors
SRAM Chainring Bolt Kit Red Quarq
$25.99
- CHAINRING BOLT KIT 5X2 M8.5X7 / M8.5X5 STEEL BLACK, HIDDEN BOLT INCLUDING SPACER QTY 5
Cane Creek 40-Series Zinc-Coated Steel Cartridge Bearing - 45 x 45 Degree
$11.99 - $25.00
40-Series replacement cartridge bearings feature durable black oxide construction. - Compatible with 110-, 40-, and 10-Series headsets
Cane Creek Hellbender Headset Bearing
$24.99
Hellbender bearings have an improved seal structure and are cross compatible with Cane Creek headsets.
Problem Solvers Singlespeed Cassette Cog Carrier
$14.99 - $24.99
Problem Solvers' Cassette Cog Carrier (CCC) bolts on to a splineless single-speed cog to give you a wide, Shimano-splined cog to run on your freehub body. The wide profile won't damage your freehub body. Tech Details: Aluminum carrier with steel cogs
Wheels Manufacturing Inc. Aluminum Headset Spacer
$3.00 - $24.95
You have to get that handlebar height just right. It's more comfortable, more efficient, and helps keep your entire upper body healthier. Wheels Manufacturing has your well-being covered with a wide variety of sizes to ensure your bars are right where they need to be. - Spacers are sold individually or in packs of 5 or 10 spacers. Select options from the dropdown menus to display pack size
Shimano Dura-Ace 9001 STI Lever Hoods
$24.00
If you put in a lot of miles and/or sweat a lot, your shifter hoods probably need freshening up. Grab a pair of Shimano Dura-Ace STI Lever Hoods to make your bike feel new again. - Fits Dura-Ace 9001 STI levers
Jagwire Disc Brake Shims
$23.99
Use these stainless steel Jagwire disc brake shims to position a 6-bolt rotor in just the right spot.
Problem Solvers Backstop
$23.99
The Problem Solvers Backstop bolts onto the frame to provide two stops for your cable housing. It's made of light, durable CNC-machined aluminum with a stainless-steel bolt, and the stops are slotted for easy cable installation/removal.
Problem Solvers Double Chainring Bolts - 8mm
$14.15 - $23.50
The Problem Solvers Double Chainring Bolts include 5 chainring bolts and nuts that are 8mm wide. This is the right size for most double-chainring setups. These chainring bolts are made of either aluminum, stainless steel, or chromoly.
Problem Solvers Single Chainring Bolts - 6mm
$15.99 - $23.50
The Problem Solvers Single Chainring Bolts include 5 chainring bolts and nuts that are 6mm wide. This is the right size for most single-chainring setups. These chainring bolts are made of either aluminum, stainless steel, or chromoly.
Profile Design F-19 Replacement Pads
$22.99
Profile Design's F-19 Replacement Pads are the correct ones for their F-19 armrests. These pads feature Lycra-covered medium-durometer foam and are held on with Velcro backing.
SRAM Flat Mount Disc Brake Adaptor
$16.99 - $22.99
Disc brake mount adaptor. - Includes stainless steel adaptor and caliper bolts
SRAM IS Disc Brake Adaptor
$19.99 - $22.99
Disc Brake Adaptors - Includes Stainless Bolts
Page 1 of 3 Next page