• Allows the use of downtube shifters on bikes without downtube shifter braze-ons • Compatible with 9/10-speed Shimano shifters • 31.8mm clamp with shims for 28.6mm tubes • Shifters not included
The Problem Solvers GXP Spindle Adapter Kit lets you adapt a GXP crankset to a BB30 or Press-Fit 30 bottom bracket. It's used with the Problem Solvers BB30/Press-Fit 30 Adapter Kit, which is sold separately.
These simple clamps allow riders to mount I-Spec II compatible shifters or dropper levers onto their bars without the otherwise-requisite Shimano I-Spec II compatible brake levers. Sold individually and can be used for either right- or left-hand side. - Hinged clamps for easy installation without removing other components - AL-6061, anodized black - 23 grams - For use only with I-Spec II compatible shifters or dropper lever
$8.99 $15.99 44% Off
Allows you to use a 1-1/8th inch stem on a bike with a 1-inch steerer.
Profile Design's UCM Universal Computer Mount provides a convenient 25mm long place to mount your computer on your aero bars. It installs without tools, stays put and can be positioned as needed for easily viewing and controlling your computer.
Profile Design's F-19 Replacement Pads are the correct ones for their F-19 armrests. These pads feature Lycra-covered medium-durometer foam and are held on with Velcro backing.
Profile Design's Aerobar Bracket Riser Kit lets you customize the height of your Profile aero bar brackets and extensions for finding a perfect riding position. The kit includes two 10mm risers, two 5mm risers and appropriate-length bolts. Multiple kits can be used if you need more height. Note that this kit is not recommended for Profile Design's Carbon Stryke or T-mag bars.
Aeffect Crank Stopper Kit for Race Face Aeffect cranks slows and stops the crank for no-footed tricks.
Replacement Remote-end Hose Barb for RockShox Reverb dropper seatposts. - Fits all generations of Reverb
In the heat of enduro racing, you might not want your Reverb dropper post to drop to the lowest setting. To keep you from limiting yourself, RockShox created the Reverb Enduro Height Collar. This machined aluminum collar clamps to the Reverb seatpost to limit your post's travel from reaching its full potential. It features a hinged clamp for easy installation and removal.
$51.99 - $70.00
RockShox's Maxle Lite is a lightweight aluminum through-axle system. It lets you remove and install your wheel as fast as with a standard quick-release while delivering the awesome stiffness with the improved strength and control of a through-axle. Plus, the lever can be closed in whatever position you like and no tools are required for installation and use!
Remote rebuild kit for A1 generation Reverb and Reverb Stealth Posts. - Plunger, Button, Boot, and O-Rings - For "A1" designated posts, 2010-2012 - A1 posts have a silver return speed adjuster on the remote and no laser-etched logos on stanchion by the saddle cradle
Pike Solo Air Full Service Kit
- Pike and Pike DJ Solo Air 1 year service kit - Includes dust seals, foam rings, o-ring seals, Charger sealhead, SA sealhead
The tool-free Maxle Ultimate Rear brings exceptional stiffness and durability to your ride in a high clamping force, easiest-to-use internal cam thru axle system.
The new OneLoc remote provides total control over your RockShox fork at your fingertips. The increased leverage at the bar translates in a smoother and easier actuation. Its countless mounting options (left and right, below or above the bar, tall or standard clamp) make it an ideal companion for SRAM's drivetrain, brakes and RockShox's Reverb remote.
It’s tough to find space for a remote that looks good and lets the rider maintain full control. Enter TwistLoc: Twist to lock, push the button to unlock. It controls forks, rear shocks, or both simultaneously. With a consistent grip size and light-touch action, TwistLoc maximizes efficiency while keeping your hands safely on the bar. Features - Easy action: Twist to lock, push button to release - Curved "CRVD" and straight "STRT" cable options - Perfect for XC, Trail, and Enduro usage - Fixed grips included
$124.00 - $137.00
This hydraulic lockout offers completely sealed and dependable suspension fork or rear shock lockout control through the click of an easy-to-reach button that can be triggered with a single thumb press. Press on to lock, press again to unlock. It’s just that easy. - Includes Hose, Banjo, Cover Part
Power Links provide tool free chain assembly. - 8-speed width: 7.1mm - 9-speed width: 6.8mm - Chain Compatibility: SRAM - Reusable: Yes
Power links provide tool free chain assembly. - Chain Compatibility: SRAM - Reusable: No
- From a long line of tough, light-weight chain engineering from SRAM - Chain connector type: PowerLock - For Use with SRAM 12-Speed Road Chains Only - No tools necessary to install - Chain connector qty/packaging: 4
These are the correct connecting links for SRAM's 12-speed Eagle chains. They are great for installing new chains and fixing chains on the road and trail, too. They come in a four pack, for use with four chains.
Hose fittings fit many of SRAM's newest hydraulic brake models. - Includes 5 Threaded Hose Barbs, 5 Compression Fittings, 1 T8 Torx Wrench - Fittings are backwards compatible with older SRAM and Avid hydraulic brakes
$16.99 - $22.99
Disc brake mount adaptor. - Includes stainless steel adaptor and caliper bolts
$19.99 - $22.99
Disc Brake Adaptors - Includes Stainless Bolts
The Universal Derailleur Hanger consolidates thousands of hanger options across the industry. It protects your derailleur against chain jams by pivoting back and out of the way, and slips slightly when encountering impacts. It improves shifting performance, guarantees better alignment, and works with all drivetrains. Plus, if you ever need replacement, it will be available everywhere. The UDH: one hard-working hanger. - The Universal Derailleur Hanger—or UDH—consolidates thousands of mountain bike derailleur standards. - It offers unparalleled derailleur protection and perfect alignment, guaranteed. - The UDH is designed to rotate rearward in the event of impact and features the ability to "re-rail" the chain back onto the small cog. - The UDH works with all commercially available MTB and E-MTB drivetrains from Shimano to Box to Sunrace.
External Blip mount for aero extensions and base bars - 360 degree rotation for adjustment - Aero use only to fit 22.2mm OD bar 65mm in length - Fits all Zipp aero extensions and base bars - Blips not included - Weight: 57 grams for pair (does not include Blip) - Material: Polypropylene + TPE - Compatibility: 11-speed - Recommended Group: SRAM RED eTap
- CHAINRING BOLT KIT 5X2 M8.5X7 / M8.5X5 STEEL BLACK, HIDDEN BOLT INCLUDING SPACER QTY 5
Clamp allows use of a braze-on derailleur on frames without the braze-on tab. Includes a tab to use SRAM's lightweight and easy-to-adjust chain control device. - Fits all SRAM road braze-on front derailleurs - ChainSpotter not included
GX Eagle Rear Derailleur Pulley Kit
Original equipment hydraulic hoses for no-compromise brake performance. - Fits All B (2016+) Versions of Guide RSC RS R - Hose length: 2000mm
Original equipment rear derailleur pulleys for SRAM rear derailleurs. Fits X01, X01DH, X1, GX 1x11, NX, Force CX1, Force 1, Rival 1, Apex 1 Derailleurs. - Wide-narrow pulley tooth profile holds the chain better - Stainless steel sealed cartridge bearings
Lip-Locks secure your seatpost and add functional bling to your ride. - Non-quick release version of the Flip-Lock - Machined 6061-AL with stainless steel pivot and bolt - Anodized with laser-etched logo - For smooth operation, lightly grease the bolt threads
$32.00 - $32.99
Our Post-Lock is a bicycle rack attachment point that can be positioned anywhere on your seatpost to provide a mounting point. Post-Locks do not have a lip like our Lip-Lock, Flip-Lock, and Rack-Lock so therefore cannot be used as a seatpost clamp. - NOTE: This IS NOT a seat collar and CANNOT BE USED to keep your seatpost in place - NOTE: NOT FOR USE with carbon fiber seatposts - NOTE: Please consult your seatpost manufacturer to check compatibility - Max torque 3–5Nm - AL-6061 Aluminum - Strong rack attachment points - 34mm-wide rack mount threaded for M5 bolts - Available for 27.2, 30.9, and 31.6 mm diameter seatposts
$34.99 - $36.99
Need a hand-friendly quick-release with some major bling? Then Salsa's Flip-Locks are just what you're waiting for! Regarded as some of the best out there by those in the know, these sweet seat collars are super tough, easy to use and come in a variety of colors to please your palette.
$36.99 - $37.00
Need a hand-friendly quick-release with some major bling? Then Salsa's Flip-Lock Seat Clamps are just what you're waiting for! Regarded as some of the best out there by those in the know, these sweet seat collars are super tough, easy to use and come in a variety of colors to please your palette. - Machined 6061-AL with stainless steel pivot and bolt - Anodized with laser-etched logo - Integrated Flip-Off lever - 30.0 clamp for most Salsa steel frames - 30.6 clamp for most Salsa Scandium frames - For smooth operation, lightly grease the bolt threads and keep all parts clean
- Replacement chain pin for 7- and 8-speed Shimano chains - 3 replacement pins per pack
- Replacement chain pins for Shimano 11-speed chains - Compatible with CN7900/7801 chains - 3 pins per pack
- Replacement pins for 9-speed Shimano chains - Compatible with CN-7700/HG92 chains - 3 replacement pins per pack
- Width: 5.8 mm - Drivetrain Speeds: 11 - Color: Silver - Reusable: No
Get your scratched Shimano Dura-Ace shifters looking new again with these replacement name plates. They're perfect for sprucing up a well-used bike or erasing the marks of a crash.
QUICK-LINK FEATURE - Tool-free assembly (possible) - Non-reusable - TL-CN10 BENEFIT - Easy connect - Compatible with current 11-speed chains - Quick assembly tool
Shimano Front Derailleur Braze-On Adaptors allow you to run a braze-on style front derailleur on a frame that doesn't have a front derailleur braze-on mount. Multiple sizes cover fitment on most frames.
Shimano Rear Derailleur Pulley Assemblies
Shimano Rear Derailleur Pulley Assemblies
If you put in a lot of miles and/or sweat a lot, your shifter hoods probably need freshening up. Grab a pair of Shimano Dura-Ace STI Lever Hoods to make your bike feel new again. - Fits Dura-Ace 9001 STI levers
This is the correct plug-and-play wire for Shimano's E-Tube Di2 electric-shifting systems. It comes in sixteen different lengths, so choose the one(s) that's right for your Di2 E-Tube wiring configuration.
Shimano's Di2 electric drivetrain takes shifting to the next level. Two Di2 Battery Chargers are available. Choose the model designed for your system's battery. An additional power cable is required for the external-style battery charger (sold separately). These chargers fully charge the battery in 90 minutes.
Keep the weight down and your headset snug with the Specialzied Carbon Steerer Tube Plug.
$19.99 $29.99 33% Off
These lightweight alloy bar end plugs provide a clean look and allow the use of bar ends on your Specialized carbon bar. - 100% CNC machined, 4-piece alloy design. - Dual side-loaded cylinder design ensures even pressure across full width of plug and bar end clamp. - Aluminum "lip" protects carbon bars from impacts. - Beautiful and clean machined design enhances handlebar looks. - Expansion range: 18.5mm to 20.0mm - Weight: 22g/pair - NOTE: Specialized bar end plugs are required for Specialized carbon bars.
The SRL lever gives riders with 1x drivetrains the option to control their Command Post with lever option that mounts beneath the bar in place of a front shifter. - Command Post lever for the modern 1x drivetrain systems. - Adjustable lever position allows for the perfect set up. - Sealed cartridge bearing pivot for smooth action. - Ideal pull ratio for easy lever activation. - Requires additional mounting hardware (SRAM MatchMaker or equivalent is recommended).
- Standard replacement cantilever/v-brake bosses
Surly wants you to be able to set up you ride just the way you want it. This pair of adapter washers make it so you can throw your favorite 135, 170, or 190mm O.L.D. 10mm solid axle hub into the rear end of a 142, 177, or 197mm spaced thru-axle frame. Add the adapters, add the wheel, install and tighten the nuts and, bam, you're ready to rip. Make sure the solid axle on your wheel is the right length for the frame spacing. For instance: 190mm OLD QR goes with 197mm thru-axle spacing.
If you've got rear-facing horizontal dropouts and you don't want your chain to slip when your rear wheel pulls forward, then Surly's got you covered. The Tuggnut is made from investment-cast stainless steel and it'll hold your wheel in place. Plus, it comes with an adapter for quick release axles and features an integrated bottle opener.
Pair this kit with a cassette cog of your choosing (sold separately) and discover the joy and simplicity of a singlespeed without the cost of a new wheel. The Singlespeed Spacer Kit includes a variety of high quality aluminum spacers so you can dial your chainline and a stainless steel lockring to tighten everything down right.
Small parts for TRP hydraulic disc brake systems.
- Prevents chain derailment when shifting to inner ring - Adjustable hose-type clamp fits 1-1/8" to 1-3/8" seat tubes
Bolts, clamps and washers for Thomson Seatposts and Seat Clamps. - Sold individually, includes bolt, washer and nut
$29.99 - $39.95
Precision CNC machined of light and durable 7000-series aluminum with a fine anodized finish, and 100% made in the USA, Thomson's Seatpost Collar is a beautiful upgrade for your bicycle. It features their bolt, washer and barrel nut combination that allows float on both sides of the collar slot for consistent clamping force. Plus the bolt-hole angle, the collar's 12.7mm inside height and the offset slot, ensure optimum seatpost clamping force at only 25 inch pounds of torque to protect your precious frame and seatpost.
$35.99 - $39.95
Like putting on a fine suit, adding Thomson's X4 Dress Up Kit to your Thomson X4 stem (sold separately) helps you look your best for any riding occasion and stand out from the crowd. This cool kit includes an anodized faceplate and top cap, 6 silver bolts and 6 black bolts so you can customize the look of your front end and add some class to your ride.