Filter By:

  • Show More Brands

  • Show Fewer Brands

Stems

Salsa Guide Trail Stem
$40.00
The Guide Trail Stem is lightweight, durable, and provides excellent steering response. Available in super short lengths for use on new-school trail bikes with wide bars, short rear ends, and long front-center geometry. - AL-6061-T6 aluminum construction - 3D-forged for increased strength, then CNC-machined - 4-bolt faceplate design - 31.8mm bar clamp - Bead-blasted, then anodized, finish
Ritchey 4-Axis Adjustable Stem
$49.99
Ritchey's 4-Axis Adjustable Stem features a precision 3D-Net shaped forged shaft that interconnects with a precision broached clamp to create the strongest, lightest, most secure adjustable stem available. - Stainless steel bar and steerer clamp bolts - Stack Height: 40 - Weight: 219g
Ritchey Adjustable Road Stem (25.8mm)
$34.99 - $49.99 $49.99 Up to 30% Off
Ritchey's Adjustable Stem is a super-versatile stem ready for any riding style. The angle can be adjusted from plus-45 degrees to negative-45 degrees and anywhere in-between, allowing you to fine-tune the exact bar placement you're looking for whether you want to get down into a super-aero position or sit up in a back-friendly upright position. Plus, it's made of forged aluminum for light weight and excellent durability.
Ritchey C-260 Stem
$49.97 - $129.99 $109.95 - $129.99 Up to 55% Off
At just 103 grams, Ritchey's C-260 is among the lightest stems in the world. This revolutionary design starts with a handlebar clamp that wraps a full 260 degrees around the bar to distribute clamping stress evenly through the handlebar, faceplate, hardware and stem body. The steerer tube clamp uses three bolts and a curved slot to reduce clamp stress on the steer tube. So you can run carbon bars and a carbon steerer no problem. Weight and stiffness were prime considerations; the C-260 is 3D forged from 7050 aluminum and machined, even the steel M4 bolts shave a few grams with no sacrifice in strength or rigidity.
Ritchey Comp 4 Axis Stem
$19.99 - $39.99
- 3D net forged 6061 alloy construction - Angled steer tube clamp slot reduces stress on carbon steer tubes - Stainless steel bar and steerer clamp bolts - Material: 3D net forged 6061 - Angle: +/- 6 degree - Steerer Height: 42mm - Steerer: 1-1/8" - Faceplate Width: 42mm - Bead-blast Black finish - 160g (110mm)
Ritchey Comp 4-Axis 30D Stem
$39.99
Pro caliber features at a real-world racer price. This 3D net forged 6061 aluminum stem offers +/- 30 degrees of stem angle for riders wanting a more comfortable fit. The angled steer tube clamp slot reduces stress on carbon steer tubes. - Material: 3D net forged 6061 - Angle: +/-30 degree - Steerer Height: 45mm - Steerer: 1-1/8” - Faceplate Width: 40mm - BB black finish - 170g (110mm)
Ritchey Trail Stem
$39.95
- C-220 degree extra-wide bar clamp improves stiffness and fits most riser bars - 3D forged 6061 alloy - 42mm steerer height with 41mm faceplate width - 142g (90mm)
Ritchey WCS C220 Stem
$89.99
The WCS C220 stem is easy to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. - The handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar - Bolt forces are aligned with the clamp so that the stem body embraces the handlebar which is less prone to damaging lightweight bars - Clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness
Ritchey WCS Carbon Matrix C220 84D Stem
$159.95
You really can have it all—the new WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it's quicker and easier to install and remove, thanks to a press-fit handlebar clamp interface and forward-facing hardware. First proven on the Ritchey TRAIL stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220-degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body 'embraces' the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The Carbon Matrix stem body is forged 7075 aluminum with a stiffness-enhancing carbon exoskeleton which makes this 12% stiffer than the WCS alloy C220 stem. Premium quality CRMO steel bolts are used throughout. - Material: 3D forged 7075, carbon encased body - 4 x 4mm coated CrMo steel forward-facing faceplate bolts - 2 x 4mm coated CrMo steel offset steer tube clamp bolts - 5Nm torque max on all hardware - Compatible with all 31.8 bars - Press-fit clamp design installs and removes like a standard stem - Angle: 84/6 degree - Steerer Height: 42mm - Steerer: 1-1/8” - Faceplate Width: 42mm - Matte UD carbon finish - 126g (110mm)
Renthal Apex 35
$109.99
- Fully CNC machined - Featuring an oversize center bore - Extensive machining and external webbing to maximize structural strength and stiffness and minimize weight
Renthal Apex Stem
$99.99
- CNC machined 2014 aluminum body and 7075 aluminum clamps - 240 degree wrap-around, twin plate clamping system - External webbing to maximize structural strength - 118-158g including stainless steel bolts
Renthal Duo Stem
$99.99
- High strength and ultra-low weight combined with a low 40mm stack height make for a great all around stem - Stem is horizontally divided and machined in two pieces, enabling weight to be reduced to the absolute minimum without compromising strength
Renthal New Integra
$109.95 - $112.99
Renthal's revolutionary Integra stem combines high strength with ultra-low weight. The use of two independent, C-shape handlebar clamps allows the stem body material to be reduced to a minimum, while maintaining an incredibly stiff and strong structure. The ultra-wide, 64mm handlebar clamping area increases torsional rigidity and the use of just six bolts vastly reduces overall weight. In addition, the uninterrupted clamp on the underside of the handlebar eliminates stress risers found on most other clamps, which can lead to handlebar failure.
Race Face Aeffect 35 Stem
$39.99 - $49.99
The RaceFace Aeffect 35 stem brings the advantages of a 35mm bar to the XC/Trail crowd at a mid-level pricepoint while maintaining a refined Race Face look. - Forged and machined from 6061 aluminum - Interlocking 4 bolt bar clamp secures your bar and distributes loads away from bolts - Stack Height: 39mm - Weight: 155g (60mm)
Race Face Aeffect R 35 Stem
$44.99 - $59.99
Built for all-mountain riding, the new Aeffect Rally 35 stem is a no nonsense workhorse. With increased strength and shorter length options available for modern bike geometry, Aeffect R performs well above its price point…and all of this at a competitive weight.
Race Face Atlas 35 Stem
$99.99
RaceFace designed their Atlas 35 stem to reduce overall system weight while retaining the proven stiffness and performance the Atlas line is known for. The stem itself is measurably stiffer than the 31.8mm offering and, although the system is a seemingly burlier build, the weight savings gained by the reduction in bar material actually makes the 35 system lighter overall. An impressively light, strong addition to your aggressive trail or DH/FR build. - Four-bolt bar clamp holds bar securely in position - Interlocking U-Shaped Handlebar Clamp Geometry - Faceplate eliminates stress risers which cause your bar to bend or break - Opposing bolts on steer tube clamp provides extreme clamping power while reducing stress on the steer tube - Stack Height: 40mm
Race Face Atlas Stem
$99.99
The RaceFace Atlas is designed to bridge the needs of AM and FR/DH riders: light enough for AM, tough enough for FR and DH, providing the ultimate in versatility. - Four bolt bar clamp holds bar securely in position - Interlocking U-Shaped Handlebar Clamp Geometry - Faceplate eliminates stress risers which cause your bar to bend or break - Opposing bolts on steer tube clamp provides extreme clamping power while reducing stress on the steer tube - Stack Height: 40mm
Race Face Chester 35
$44.99
RaceFace's Chester 35 Stem is a practical stem with 2 length options and that legendary bomb-proof Race Face toughness baked right in. - Forged and machined from 6061 aluminum - Interlocking 4 bolt bar clamp secures your bar and distributes loads away from bolts and into the body - Stack Height: 42mm
Race Face Chester Stem
$54.99
- Forged & blasted 2014 alloy for high strength & fatigue resistance at a reasonable weight - Four bolt bar clamp holds bar securely in position - Interlocking U-Shaped Handlebar Clamp Geometry transferring more load through the stem body and not the bolts - Faceplate eliminates ‘stress risers'
Race Face Respond
$47.99
RaceFace designed their Respond stem for DH/AM riders seeking big hit performance at an All Mountain weight and beer budget cost. It's engineered to offer an optimal combination of strength, stiffness, and weight. - Forged & blasted 6061 aluminum for high strength & fatigue resistance at a reasonable weight - Four bolt bar clamp holds bar securely in position - Interlocking U-Shaped Handlebar Clamp Geometry transferring more load through the stem body and not the bolts - Faceplate eliminates 'stress risers' which could cause your bar to bend or break
Race Face Turbine 35 Stem
$99.99
- Intended for XC, Trail and All Mountain use - Machined to precision with 7075 aluminum for high strength & fatigue resistance at a very light weight - Interlocking 4 bolt bar clamp secures your bar and distributes loads away from bolts and into the body - Bar Clamp Diameter: 35mm - Stem Angle: -84 deg , +96 deg
Race Face Turbine R 35 Stem
$104.99
Race Face took their super popular Turbine 35mm stem and turned the volume up to R. Increased strength to handle the harshest aggressive all mountain riding combined with an update to 0-degree size for optimized fit and performance. This stem sets the new standard in weight vs strength. - CNC Aluminum - 0-degree rise for perfect fit on aggressive bike frames - Extensive CNC machining for weight reduction without impacting strength - TopLock faceplate design for easy and secure installation
Race Face Turbine Stem
$93.99 - $99.99
- Intended for XC, Trail and All Mountain use - Machined to precision with 7075 aluminum for high strength & fatigue resistance at a very light weight - Interlocking 4 bolt bar clamp secures your bar and distributes loads away from bolts and into the body - Bar Clamp Diameter: 31.8 mm - Stem Angle: -84 deg , +96 deg
Promax Banger Stem
$69.99
Promax Banger stems have a front-load design and can be used with either side up, providing a 5-millimeter drop or rise. Available with 48-millimeter and 53-millimeter extensions, they are cold forged from the highest quality 6061-T6 aluminum then CNC machined to enhance the shape and further reduce weight. - Stack height: 30.5mm
Promax DA-1 Stem
$69.99
Promax's DA-1 XC mountain bike stem is 3D cold-forged, then CNC-machined from 6061-T6 aluminum to create a lightweight and strong stem. The two-piece faceplate features their bar-gripping DWT (Dynalock Web Technology), which increases the bar/stem interface.
Promax Impact Mini Stem
$49.99
There's no reason a bantam-sized rig shouldn't have the advantages a top-notch stem provides. Promax's Impact Mini Stem fits the bill with rock-solid bar clamping, stunning good looks, and the stiffness to nab the holeshot and keep it on-line through the berms. Set that mini up right! - Cold-forged and CNC-machined from 6061-T6 aluminum alloy - Top-load clamp design - Fits 1-inch steerer tubes
Promax Impact Stem
$69.99
The Impact is Promax's top-load BMX stem. They come in 48-, 53-, and 60-millimeter extensions and are cold-forged from the highest quality 6061-T6 aluminum then CNC-machined to refine the shape and further reduce weight. The “open” design keeps weight low while maintaining plenty of strength and ensuring your bars stay put. - Weight: 9.8oz. - Stack height: 30.5mm
Promax S-29 Stem
$69.99
Developed for longer-travel trail bikes, Promax's S-29 stem offers the perfect configuration to set you up for maximum comfort and control. Featuring an oversize extension tube and faceplate with massive clamping area, it’s sure to keep your bars stylishly in place through the most demanding terrain. These stems are cold-forged and CNC-machined from 6061-T6 aluminum for strength, low weight, and durability.
Promax S-35 Stem
$40.99
Promax takes handlebar control up a notch with their S-35 Stem. Its oversize 35mm handlebar clamp cranks up the cockpit stiffness without adding weight or sacrificing any strength. - 3D cold-forged and CNC-machined from 6061-T6 aluminum alloy
Profile Design 1/Seventeen
$57.99
Simple, elegant, lightweight design can be run in negative or positive position for -17°/ 17° in rise. 3D forged 6061-T6 aluminum combined with a 4-bolt faceplate provides increased stiffness. - Weight: 162g (100mm) - Length: 70, 80, 90, 100, 110, 120, 130mm (±17°) - Material: 3-D Forged 6061-T6 Aluminum - Clamp Diameter: 31.8mm - Angle: 73° (±17°) - Steerer Tube Diameter: 11/8in - Stack Height: 40mm - Clamp Width: 40mm - Clamp Tourque: 5Nm - Finish: Matte Black with White Accents