Nothing says, “see me now,” louder than a strong and bright taillight, both for day or nighttime use. With its spherical lens, which directs lumens more than a 1/2 mile (800m) in the brightest California sun, the Stix Elite taillight is the go-to taillight for our infamous Lunch Ride. It’s all about peace of mind, really, and with its six light modes, you get multiple options for day or night visibility. And depending on the chosen mode, this taillight will run for up to 77 hours, and it’s easily charged via built-in USB tab, which eliminates the need for a cable. - 12 to 100 lumens output - Dome lens concentrates output from CREE XBD P4 center LED for 1/2 mile (800m) visibility in the brightest sun. Fresnel lenses for secondary LEDs provide wide angle visibility - 2.5- to 77-hour runtime - Charges in the USB port of any laptop or phone charger in two hours (no extra cables needed) - Flexible mounting system works with seatposts from 22.2mm up to 35mm in diameter, plus it's compatible with most seatstays (Aero strap mount available separately) - Six operating modes: Steady High (50 lumens), Steady Low (18 lumens), Power Surge (37 lumens), Power Flash (100 lumens), Disco Flash (40 lumens), Eco Flash (12 lumens) - Red/Green battery charge level indicator - Additional mounting options available separately
Tiny but tenacious, the Stix Elite taillight packs a 68-lumen punch that can be seen from a multiple of directions. Its wide-angle light and six modes—ranging from steady to flash— make you highly visible to drivers, which will increase your safety and peace of mind while riding. The tail light runs for up to 77 hours, depending on mode choice, and is charged easily and conveniently via USB. - 12 to 68 Lumens output. - 2.4 hours to 77 hours runtime. - Charge in the USB port of any laptop or phone charger in two hours (no extra cables needed). - Flexible mounting system works with seatposts from 22.2mm up to 35mm in diameter, plus it's compatible with most seatstays (Aero strap mount available separately). - Six operating modes: Steady High, 46 Lumens; Steady Low, 18 Lumens; Power Surge, 37 Lumens; Power Flash, 68 Lumens; Disco Flash, 40 Lumens; Eco Flash, 12 Lumens - Red/Green battery charge level indicator. - Additional mounting options available separately.
Serfas’ TL-HLMT Helmet Light offers safety and simplicity. Its 3 red LED system mounts easily on your helmet or on your seat post for increased visibility. The TL-HLMT offers one solid and two flashing modes and its built-in reflector enhances your visibility during daylight hours.
Be safe out there with Serfas' TL-STN Seat Stay Taillight. This water-resistant safety beacon will get you noticed out on the road with a large, super-bright 1/2-watt red LED flanked by 6 brilliant smaller LEDs. Plus, the weatherproof silicone body stretches to easily mount to any tube on your bike. Use a few Seat Stay Taillights for 360-degrees of visibility! This great light has steady, strobe and flash modes.
$19.97 - $45.00 $35.00 - $45.00 Up to 50% Off
Serfas' Thunderbolt Taillight delivers 35 lumens in an extremely versatile, USB-rechargeable package. Attach the water-resistant silicone body nearly anywhere on your bike, and use the high, low, or two flash modes to make sure cars or cyclists can see you when approaching from behind after dark. At just 50 grams, you won't even notice it's on your bike — but others will!
- Built-in belt or backpack clip - Bracket designed to fit multiple applications including aero-style bars - Can be mounted horizontal or vertical on bracket - USB quick charge in 3.5 hrs - Modes: High (25 Lumens): 2.5 hrs, Low (10 Lumens): 5 hrs, Flash (25 Lumens): 5 hrs - Weight: 46 Grams With Bracket - User Replaceable Battery: Li-Polymer
$39.97 $89.99 56% Off
Coming up with ways to make you safer on the road, when using Serfas lights, is a top priority. Their "BLAST" Audible Warning System emits a loud 85 Decibel signal when your light battery gets under 10-minute runtime in that specific mode. How It Works - When the battery reaches 10 minutes of runtime, in its current mode, the light will emit a long beep followed immediately by a short beep. Sound will continue every minute. - When the power button is pressed it will put the light in the next longest running mode & it will restart the battery low alert until 10 minutes of runtime in the mode is reached. Repeat as necessary. Example: Going from highest mode to lowest mode at first beep could extend runtime up to 5 times.* - Light will emit beep sound repeatedly when last minute of runtime in the current mode is reached. - While charging the light the power button will blink blue. When full charge is achieved light will beep to notify charging cycle is complete. - Light emits a beep when power button is pushed & light goes from mode to mode. Features: - "Blast" Audible Warning System Alerts Rider Of Low Battery - Aero-Bracket Fits Almost Any Post or Other Application On A Bike - Amber Secondary LED Breaks Up A Sea Of Red In Traffic - 70 Micro LEDs Specs: - Solids Modes: High Red (85 Lumens): 1 hr, Medium Red (50 Lumens): 2 hrs & Low Red (25 Lumens): 4 hrs - Flash Modes: Pulse Red/Amber (150/70 Lumens): 1.25hrs, Alt Red/Amber (70/35 Lumens): High Flash Red (150 Lumens): 8 hrs, - - Low Flash Red (60 Lumens): 10 hrs, High Flash Amber (70 Lumens): 10.5 hrs - Weight: 55 Grams Without Bracket - Battery: USB Rechargeable Li-Polymer
The Vis 180 series redefined tail lights as the safest, most reliable platform available. The Vis 180 Pro continues this tradition by offering the brightest tail light on the market with a piercing 150 lumens of output. With a wide spread of red rear lighting combined with Light & Motion exclusive amber side lights for increased visibility at intersections, the Vis 180 Pro is the essential tail light for commuters. Featuring: - 150 Lumen output certified to the FL-1 Standard - Engineered with the highest-level CREE LED and enhanced firmware - Dual LED array to maximize visibility - Ultralight Aluminum body - Accurate battery charge and status indicator with 4 status levels - Custom engineered reflectors and optical solutions optimize the light to distribute red and amber light a full 180 degrees - Secondary LED spreads amber light for 180 degrees of visibility - Simple ratchet in/out adjustability - Slide lock system allows you to easily take on / off without tools - Integrated clip for attaching to backpack or messenger bag; - Bike rack mount available and sold separately - Micro USB Rechargeable (Fully charges in 5 hours) - Low battery warning and auto shut-off to prevent damage - Multiple power settings - HiPulse: 6:00 / 150 - LoPulse: 12:00 / 75 - Solid: 4:00 / 150 - Paceline: 32:00/ 5 - Ultralight system weight: 102 grams - Designed and Assembled in California - Backed by Light & Motion’s 2 Year Warranty and Enhanced Experience Guarantee Included: - Seat Post Mount, Micro USB Charging Cable
The future of cycling taillights is here. Vya is a game-changing design, blending powerful output with revolutionary smart features. The piercing 50 lumen output is easily visible over a distance of 1km, even in bright daylight. What separates Vya from traditional taillights are smart auto-on/off sensors – start riding and the light turns on automatically and will shut itself off after the ride, with a delay built in for stoplights. The scientifically designed SafePulse beam pattern not only gets noticed from motorists, but allows the driver to accurately judge distance from the rider and their direction of travel – a safety feature not possible with strobing lights. Attaching Vya is effortless with a simple clockwise 1/4 turn into the mount locking the light in place and activating the auto-on feature. When it comes time to recharge, remove Vya from the mount in seconds and insert the integrated USB paddle directly into a computer or USB power outlet – no cables keeps recharging simple and convenient. The next evolution in bike safety, Vya takes powerful safety lighting and keeps the rider safe so they can focus on the road ahead. Features - 50 Lumen Output certified to the FL-1 Standard with high powered premium CREE LED - Smart sensor technology senses motion and automatically turns Vya on when inserted into mount and will remain on, even when a rider pauses at stoplights - Auto-off when bike is parked or light is removed from mount to prevent the dreaded ‘dead bike light’ when it comes time for the next ride - SafePulse beam pattern scientifically designed to enhance a passing driver’s ability to judge the cyclist’s distance and direction of travel without the risks associated with flashing lights - Beam pattern optimized to give a wide red swath of light that can be seen clearly from the rear and side ideal for city riding - An impressive 8 hour runtime allows Vya to be used on multiple rides before needing a recharge, low battery status is indicated by rapidly flashing sidelights - Ultra-compact mount with durable rubber strap designed to be compatible with various size seat posts and can even be attached to seat stays - USB Mount Receptor allows light to be securely mounted or removed from bike in seconds with a simple, secure 1/4 turn lock; light will not turn on when removed from mount - Direct USB charging without cables fully charges in 2 hours - Made with bio-renewable material waterproof to 1 meter (when inserted in mount) for all-conditions reliability (IP67 Rated) Specifications - Lumens: 50 (SafePulse) - Runtime: 480 min (SafePulse) - Beam Angle: 30° (flood) - Charge Time: 120 min
With the push of a button, the 2’Fer can switch between a white 60 lumen front light and a red 20 lumen rear light. Holding the button for 2 seconds turns the light on and off, and pushing the button once changes modes between white solid, red solid, white flashing and red flashing. The light also remembers which mode you were last using and turns on in that mode. - Charging cable included, no tools required - Lithium Polymer battery - Waterproof to IP-65 standard - 3 hour recharge time - 18g / 0.04lb each As Front: - 60 Lumens - Runtime: High 1.5hrs, Flashing 5hrs As Rear: - 20 Lumens - Runtime: High 1.5hrs, Flashing 5hrs
Blackburn's minimalist Click rear light is incredibly visible to drivers, yet nearly invisible on your bike. A simple 'click' of the lens will power up 2 LEDs that pump out 4 lumens of beautiful, bright light that is even visible from the side of your bike for cross traffic. The silicone mounting strap makes it easy to install/remove and works on pretty much any handlebar or bike frame. Two CR2032 coin cell batteries are included and are super-easy to replace. - 4 lumen rear - Versatile silicone mounting system - Waterproof to IP-65 standard
- Blackburn's most affordable Local rear light is powered by a single super bright LED. - Built to ANSI FL-1 light standard - 10 lumens - 2 modes: High: 10 lumens, Steady Flash: 10 lumens - Runtime: High: 70 hrs, Steady Flash: 140 hrs - Silicone mount, 1 size fits all - Large red lens power button is easy to turn on/off while pedaling or wearing gloves - Replaceable AA batteries (Included)
Page 1 of 1